Removes Up To 43.5L/Day: This is a high-quality refrigerant dehumidifier, specifically designed and built to perform in challenging environments. It has a broad working temperature range of 3°C up to 35°C. It offers great capacity and performance for water damage restoration, construction drying and more.
2 x Air Ducts: 2 x 100mm air ducts on the back of the unit and a high pressure fan allow for the connection of flexible ducting (max length 5m), which is suitable for underfloor drying out of floorboards after a flood or leak.
1kW Heating Element: This warms up the dry, processed air so that it can collect more moisture as it circulates the area - improving the drying efficiency.
Digital Control Pad: An easy to read screen display allows for superior control, quick access to settings, and detailed readouts of the dehumidifier. It displays accurate room humidity, temperature, energy consumption, service status, and allows for easy fault finding. It also includes a built-in hygrostat.
Airflow Rate Of 560m³/h: This unit has an impressive airflow to draw in large volumes of humid air and remove moisture using the natural process of condensation.
Eco-Friendly Refrigerant: Uses the new, cleaner R454c refrigerant that is more efficient and meets 2020 EU regulations
Internal 14L Water Collection Tank: The condensate water is collected in a large internal tank, which needs to be emptied at regular intervals.
Gravity Fed Drainage Possible: Permanent gravity fed drainage can be established with optional ½” hose connection, for continuous operation.
Condensate Pump Kit Available: A condensate pump cassette with a 10m hose can be supplied, ideal when gravity fed drainage is not possible. This allows the unit to pump the condensate to a drain up to 10m from the dehumidifier and has a vertical lift capability of 3 metres. Using the pump removes the need to manually empty the water tank when it becomes full, and allows moisture to be pumped out of basements and cellars easily.
Optional Remote Hygrostat Available: The hygrostat comes with a 3m cable and allows you to set a desired humidity level within the space. The hygrostat will switch the dehumidifier on and off automatically in order to maintain the set humidity level, saving energy and adding extra convenience.
Galvanised Steel Design: The outer casing is manufactured from powder coated hot galvanized steel and the evaporator and condenser are epoxy coated, for protection and durability on site.
Hot Gas Defrost: An automatic defrosting function is also built into the system. If the evaporator reaches 5℃, the solenoid valve flushes the evaporator with hot gas. Once a preset temperature is reached, the dehumidifier resumes regular operation.
Large Wheels & Handle: The adjustable handle and large durable wheels allow for excellent mobility between rooms and even up stairs and down to basements.
Stackable Design: Ideal for convenient storage and transportation.
The Dantherm CDT 40S is a professional refrigerant dehumidifier for rapid extraction of excess moisture in a room. It is an efficient, cost-effective dehumidifier that is suitable for use in industrial, commercial, and domestic properties following a leak, flood or construction and renovation work. The CDT 40S has an airflow of 560 m³/h and an impressive operating temperature range of 3 - 35℃ for effective drying in a range of challenging conditions.
This versatile dehumidifier features two air ducts on the back of the unit for connection to flexible ducting (max length 5m) - ideal for underfloor drying out floorboards after a flood or leak. It also has a 1kW heating element which warms up the dry processed air so that it can collect more moisture as it circulates back into the area - improving the drying efficiency.
The Dantherm CDT 40S can remove up to 43.5 litres of water within 24 hours. It contains an efficient high-pressure fan to quickly draw in large volumes of humid air through the vent. The air passes through a refrigerated evaporator inside the dehumidifier. The evaporator is kept cold and cools the air down to below its dew point temperature. The moisture in the air then condensates and drops into the internal 14 litre water collection tank. The dry air is then passed through a hot condenser before it is expelled back into the room.
The Dantherm CDT 40S MKIII is a more environmentally friendly refrigerant dehumidifier. It contains the newer, eco-friendly R454c refrigerant, which offers improved efficiency, is non-toxic and easily replaces the previous refrigerant used. R454c meets all of the 2020 EU regulations for safe use in climate control equipment.
The CDT 40S is made with a long-lasting, powder coated hot galvanized steel with plastic bumpers at the base. Both the evaporator and the condenser are coated with an epoxy resin to protect them from rust and other potential damage. The unit is narrow enough to safely navigate through halls, doorways, and passages without damaging the panels, doors, or walls. These mobile dehumidifiers are stackable, which makes them ideal for storage and transport from site to site. The adjustable handles, large wheels, and overall lightweight construction make the Dantherm CDT 40S extremely easy to move from area to area.
An easy to read screen display allows for superior control, quick access to settings, and detailed readouts of the dehumidifier. The electronic control panel can display accurate room humidity, temperature, energy consumption, service status, and allows for easy fault finding. For further usability, the CDT 40S automatically stops operating if the water tank reaches capacity so it can be left on while unattended. An automatic defrosting function is also built into the system. If the evaporator reaches 5℃, ice will begin to form on the surface. To prevent an impact on the performance of the dehumidifier, the solenoid valve flushes the evaporator with hot gas. Once a preset temperature is reached, the dehumidifier resumes regular operation.
The Dantherm CDT 40S has a 14 litres water collection tank as standard. A ½” hose can also be connected to the dehumidifier for gravity fed drainage, allowing continuous operation so that you do not need to keep emptying the water tank. As an upgrade, you can choose to replace the tank with a condensate pump cassette and 10 metre drain hose. The pump even has a vertical lift capability of 3 metres. This is ideal for areas where gravity fed continuous drainage is not possible. Using the condensate pump cassette also removes the need to manually empty the water tank when it becomes full. You can also add a remote hygrostat to your order. The hygrostat comes with a 3 metre cable and allows you to set a desired humidity level within the space. The hygrostat will switch the dehumidifier on and off as required in order to maintain the set humidity level, saving energy costs and adding extra convenience.
See More Like This: Compressor Dehumidifiers, Industrial Dehumidifiers & Large Dehumidifiers
Operating range – humidity: 40-100% RH
Operating range – temperature: 3-35°C
Dehumidification capacity at 30°C/80% RH: 43.5 L/24h
Air volume: 560 m³/h
Power supply: 230 V/50 Hz
Max. power consumption: 1.9 kW
Refrigerant: R454c
Sound level (at 1 metre): 58 dB(A)
Water container capacity: 14 litres
Height (Handle up): 823mm
Width: 542mm
Depth: 539
Weight 43kg
Swift delivery as always, just when I need it most. Sturdy, reliable and quality as always too. Thanks!
Super quick delivery, no messing around, great product
Definitely glad we invested - so worth it. Prompt delivery and clearly high product
Trustworthy company and products - delivery was very fast and so were responses, great What a brilliant product, high value for its cost, and arrivd quickly
Rapid delivery, sturdy product that will last well, veryh happy No nonsense, straight forward communication and fast delivery - really pleased
Whether you need a long-term, short-term, or temporary climate solution, sometimes it can help if you can break the costs down, especially if the situation is unexpected or an emergency.
To help our customers and make climate control and air quality equipment more accessible, we've worked with PayPal to provide a way to spread the cost with PayPal Pay in 3. You can use Pay in 3 for eligible shopping cart amounts between £30.00 to £2,000.00. Terms apply.