Call FREE for expert advice0808 196 9380
34L Per Day Capacity: Excellent moisture extraction capacity from a compact unit, to dry spaces out following leaks & floods, dry rooms following construction work, dry materials and ingredients in storage, and prevent moisture damage & corrosion.
Tough Stainless Steel Casing: Resistant to corrosion, suitable for a range challenging environments.
Silica Rotor: Efficiently absorbs moisture from the air, even in extremely low temperatures.
PTC Heater: Dries the rotor to expel moisture out of the unit as vapour.
Hour Meter: Allows you to monitor time on the job.
3 Hole Design: Air in, dry air out & wet air exhaust. Moisture is removed by the absorbent and it is purged from the system as water vapour. This means there is no internal water tank to empty and the dehumidifier can be left to run 24/7.
Duct Air In & Out: The Ebac DD400 dehumidifier has vents fitted with flanges. Air can be vented in and out using simple ducting.
Compact & Portable Size: Can be used in very small spaces, such as cabins, engine rooms, cupboards, crawl spaces and more.
Remote Humidistat Available: Allows you to set a desired humidity level and the unit will switch on and off as required to maintain the set humidity.
The Ebac DD400 is a compact, durable and portable desiccant dehumidifier. It has the capacity to extract up to 34 litres per day. It is capable of operating at extremely low temperatures, where a compressor dehumidifier would fail to perform.
This industrial desiccant dehumidifier can be used for a wide range of applications, such as for drying out spaces out following leaks and floods, for process drying during manufacturing processes, and to prevent condensation, damp, mould, rot and corrosion.
As it is a desiccant model, the Ebac DD400 extracts moisture from the air using a moisture absorbent silica gel on a rotor.
Silica gel is a hygroscopic material that absorbs moisture direct from the air. As air passes through the rotor, the humidity of the air is reduced, whilst the moisture content of the rotor is increased.
A smaller volume of air, the reactivation air, is heated by an internal PTC heater and passes through a portion of the rotor in the opposite direction. As this heated air passes through the rotor it will “reactivate” it by removing the moisture content from the silica gel material.
The reactivation air will leave the humidifier as warm, moist air and must be vented to outside of the building.
Continuous circulation of the room air through the dehumidifier unit gradually reduces the relative humidity in the room.
The dual air inlet feature of the DD400 is ideal for installations where the regeneration supply air, needs to be kept separate from the process supply air. Lengths of ducting can be fixed on to the process air duct and regen air duct on this dehumidifier, so air can be ducted in and out from separate spaces.
The Ebac DD400 desiccant dehumidifier is a robust, compact unit designed to control the humidity in the enclosed space in which it is placed. The casing is fabricated from stainless steel and has been designed for the exacting conditions which can prevail in challenging spaces. It combines lightness and compactness with high reliability and strength. Carry handles are provide to contribute to its portability.
Manual / Automatic control is a standard feature within the Ebac DD range of desiccant dehumidifiers, and a remote humidistat can quickly and easily be connected for automatic operation. Remote humidistat available as optional accessory.
Dimensions (H x W x D): 400 x 420 x 540 mm
Frequency (Hz): 50
Power (kW): 2.2
Current (A): 8
Process Airflow - Dry Air (m3/hr): 370
Regen Airflow - Wet Air (m3/hr): 150
Process Air Duct Size (mm): 130
Regen Air Duct Size - Wet Air (mm): 100
Rotor Wheel Speed (rph): 20
Typical Extraction(l/d): 34
Min Operating Temp (°C): -20
Max OperatingTemp (°C): 40
On/Off Control: Yes
Electronic Controls: Yes
Manual / Automatic Mode Selection: Yes
Remote Humidistat Sensor Facility: Yes
Hours Run Meter: Yes
Fitted Main Plug: Yes
Fan Speeds: 1
High Capacity PTC Heater: Yes
Process / Regen Air Fliter: Yes
Rubber Ani-Vibration Feet: Yes
Single Inlet Design: Yes
Free Standing: Yes
Carrying Handles: Yes
Stainless Steeel Construction: Yes
Inlet Duct Attachements: No
High Temperature Safety Cut-outs: Yes
There are currently no reviews for this item, why not be the first?
Whether you need a long-term, short-term, or temporary climate solution, sometimes it can help if you can break the costs down, especially if the situation is unexpected or an emergency.
To help our customers and make climate control and air quality equipment more accessible, we've worked with PayPal to provide a way to spread the cost with PayPal Pay in 3. You can use Pay in 3 for eligible shopping cart amounts between £30.00 to £2,000.00. Terms apply.