Aerial ASE 200 Industrial Desiccant Dehumidifier 220v 19 Litres

Aerial ASE 200 Desiccant Dehumidifier

Industrial absorption dehumidifier

The Aerial ASE 200 is a robust and efficient desiccant dehumidifier that can remove up to 18.75 litres of moisture from a space in 24 hours. This versatile dehumidifier is suitable for water damage remediation, building and restoration work, and controlling humidity levels in cellars, treatment plants, waterworks and more.

The Aerial ASE 200 dehumidifier is built to withstand demanding areas and continuous use. It has a stainless steel powder coated housing that offers robustness and resilience. It is also designed so that it can be stacked during use and storage so that you can safely keep multiple units on top of each other in one space - even if they are running. The ASE 200 is a compact and lightweight desiccant dehumidifier with a folding handle. It is easy to carry when installing it in a new location, and it is portable to allow for spot drying. It is a floor standing unit with 4 abrasion-resistant rubber feet for stability, and to protect sensitive surfaces from accidental damage.

High-Performance Desiccant Dehumidifier

Efficient with quality components

The Aerial ASE 200 desiccant dehumidifier offers plenty of benefits as a drying solution at home and work. It has a vast operating temperature range of -10℃ to +35℃ so that it can work well in very cold conditions. This capability is ideal for use in cellars, lofts outbuildings, and unheated sites, as the dehumidifier can run all year round, including in the winter.

The Aerial ASE 200 features a high-performance EcoDRY rotor. This is a desiccant mesh that absorbs moisture from the air as it is drawn in through the intake. Once moisture is absorbed from the air, it is heated by PTC heating elements and then blown back out via an energy-efficient radial fan to circulate. PTC heating elements are small ceramic stones that increase the power output during operation in colder temperatures. They are safe and self-regulating as they posses temperature-limiting characteristics.

User-Friendly Absorption Dryer

Excellent ease of use

The Aerial ASE 200 desiccant dehumidifier is easy to utilise as a drying solution for water damaged areas and demanding spaces. It has an inbuild hygrostat for precise humidity control. The hygrostat switches the dehumidifier on and off as and when it is required to maintain a set humidity level that has been determined for a space. This allows the dehumidifier to run independently, and also cut down on the running costs. There are also displays for the operating hours and the kWh consumption, so that you can keep track of progress and how much you are spending.

The Aerial ASE 200 dehumidifier is a 230v machine that can be plugged into and powered by a standard household 220/240-volt outlet. It comes equipped with a 4.5 metre connection cable with a mains plug, so you can have it running as soon as you get it into place. This dehumidifier also features a cable winder for practical and safe storage of the mains cable. This helps to prevent damage and accidents during storage and transport.

Optional Accessories Available

Add flexible ducting to your order

The Aerial ASE 200 desiccant dehumidifier is an efficient, versatile machine that can be used for drying water damaged spaces and for controlling the humidity of challenging environments. You can use the dehumidifier with optional flexible ducting to adapt it to a specific application. The air inlet has a 125mm flange, and the wet air exhaust has an 80mm flange. You can use these both with ducting, to vent humid air in from a separate area and to vent water vapour out of a space. The Aerial ASE 200 also has a bracket fitted on the back, with a single and dual ducting outlet option. You can unscrew the bracket and place either end of it over the dry air outlet, to have either 1 x 80mm ducting outlet or 2 x 50mm ducting outlets on the rear dry air outlet. We have 15m x 50mm Superflextract ducting and 12m x 80mm Thermaflex ducting available that you can add to your order using the tickboxes above. If you need two lengths of 50mm ducting, but 15m is too long, you can buy one length and cut it down to size.

Capacity (20°C/60% RH) 18.75 l/24h
Air Volume - Dry Air/Regeneration Air: 210/110 m³/h
Ext. Pressure - Dry Air/Regeneration Air: 150/50 Pa
Operating Temp Range: -10 - +35 °C
Operating Humidity Range: 10-95%
Nominal Power Consumption: 694 W
Power Supply: 230/1ph/50V/Hz
Sound Level: 48 dB(A)
Duct Sizes -
Air Inlet: 125 Ø mm
Dry Air Outlet: 1x80 or 2x50 Ø mm
Regeneration Air Outlet: 80 Ø mm
Product size (h x w x d): 285 x 290 x 395 mm
Weight: 14 kg

Removes Up To 18.75L/Day: The absorption dehumidifier offers a fantastic moisture removal rate, ideal for water damage remediation, building and restoration work, and controlling humidity in cellars, treatment plants, waterworks and more.

-10℃ to +35℃ Operating Temperature Range: The dehumidifier is effective in the most challenging conditions, in areas where a refrigerant dehumidifier would be no use.

Strong, Stackable Housing: The stainless steel housing offers incredible robustness and resilience in demanding areas. It is designed to be stacked, ideal for storage and transport, as well as when you are using multiple units in an area.

Compact Size: Can be carried and placed in cellars, lofts, outbuilding and more. It can also be used as a portable dehumidifier with ease, using the carry handle.

Floor Standing: Features 4 abrasion-resistant rubber feet for stable floor installation, and to protect sensitive surfaces from damage.

Inbuilt Hygrostat: Allows for precise humidity control. You can set a desired humidity level within the space and the dehumidifier will switch itself on and off as required in order to maintain the set humidity level and also saves running costs and adds extra convenience.

Maximum Absorption: The high-performance EcoDRY rotor is an efficient desiccant wheel that allows the dehumidifier to collect as much excess moisture as possible and has high mechanical firmness.

PTC Heating Element: The self-regulating Positive Temperature Coefficient heating elements are small ceramic stones that increase the power output during operation in colder temperatures.

Duct Air In & Out: This is an efficient drying system with a process air intake, dry air outlet and regenerated air outlet. You can duct air in from another space and duct the dry and wet air elsewhere. The wet air exhaust also has an 80mm flange for venting water vapour outside of a space.

Single & Dual Dry Air Outlet: The dehumidifier has a bracket fitted on the back, over the dry air outlet, with a single and dual ducting outlet option. You can unscrew the bracket and place either end of it over the dry air outlet, to have either 1 x 80mm ducting outlet or 2 x 50mm ducting outlets on the rear dry air outlet. We have added the option for you to add one or two lengths of 15m x 50mm Superflextract ducting to your order. If you need two lengths of ducting, but 15m is too long, you can buy one length and cut it down to size.

Usage Meters: You can keep track of the operating hours and runnings costs by monitoring the hour counter and kWh counter.

Standard Voltage: This industrial-grade dehumidifier plugs into a standard 220/240-volt outlet. It comes equipped with a 4.5 metre connection cable with a mains plug and a cable winder for practical and safe storage.