Thermobile Bio Energy 1 Cabinet Heater - 230v 27kW

Thermobile Bio Energy 1 Cabinet Heater

27kW biofuel cabinet heater for workshops, garages & industrial buildings

The Thermobile Bio Energy 1 is a compact & robust 27kW biofuel cabinet heater, ideal for workshops, garages, warehouses, agricultural buildings and a range of other industrial buildings. It can be fuelled using Bio Oil, Bio diesels and various vegetable oils, rapeseed oil, linseed oil, as well as waste oil and standard diesel or red diesel.

The Thermobile Bio Energy range of cabinet heaters has been developed specifically for the workshop heating market. Full combustion is achieved in a vaporising system and non-burnable residue is retained in the burner pan. The Bio Energy 1 has a closed combustion chamber and it produces a combination of radiant heat plus hot air from the top mounted 'THERMO' blower – as radial fan which offers an airflow of 1000 m3/h.

This heater helps to save on fuel costs, offers low emissions of harmful gases and provides 100% clean heat, as the exhaust fumes produces during combustion are flued out of the back of the unit.

The Bio Energy 1 cabinet heater has a 50-litre fuel tank, an overheat security thermostat, flame failure thermostat and an oil overflow security system fitted as standard. This waste oil burner has a fixed outlet temperature of 50-70 ° C and it has a switch that allows it to operate either at 20kW or 27kW, so you can select the ideal heat output for your space.

Flue Kit Available

Everything you need to heat the space safely and effectively

We have an optional flue kit available for the Thermobile BioEnergy 1 cabinet heater, which allows you to exhaust the fumes produced during combustion out of the space. The flue kit consists of a T piece complete with draught stabiliser, 5 x 1m lengths of flue piping (150mm diameter), a rain cap, 2 x adjustable wall brackets and a high-temperature silicone rubber roof flashing & fitting kit. If your ceiling is higher than 5m, we can supply extra sections of 1m piping.

We can also supply pipes with a 45 degree bend, so you can flue fumes out at an angle, if required for your space. You can add the standard flue kit to your order using the tick box above. A minimum of 4-5m of flue installation must be internal due to flue operating temperatures and are not suitable for installation with a 90-degree bend. If you require any extra parts or advice, give our sales team a call and we can customise a flue kit to suit your requirements.

Min Capacity BTU/hr: 68,000
Max Capacity BTU/hr: 102,000
Min Fuel Consumption L/hr: 2
Max Fuel Consumption L/hr: 3
Tank Capacity Litres: 50
Weight Kg: 102
Current A: 0.8
Flue Connection Ø(mm): 130
Heated Airflow m³/hr: 1000
Max Space Heated cu.ft: 20,000
Width mm: 540
Depth mm: 1050
Height mm: 1270

27kW Heat Output: Great capacity from a compact unit. Ideal for heating workshops, garages, warehouses, agricultural buildings and a range of other industrial spaces effectively.

Two Heat Settings: The Thermobile Bio Energy 1 can operate at full capacity of 27kW or reduced capacity of 20kW, so you can select an appropriate heat level for your space.

100% Clean, Fume-Free Warm Air: Circulates only clean, fume-free warm air, as the fumes produced during combustion are exhausted outside.

Range Of Fuel Options: Can be fuelled by biofuels, such as rapeseed oil and certain vegetable oils, waste oil and diesel. This provides a great cost saving, as you can fuel the heater using oils produced in the course of your everyday business.

'Thermo' Blower: Efficient radial fan circulates warm air out of the unit and around the space, with an airflow rating of 1000 m3/h.

150mm Flue: The exhaust can be connected up to lengths of flue pipe in order to vent fumes outside. (Flue Kit available as an accessory).

Separate Combustion Air Intake: The combustion fan draws in clean air from outside of the building, ensuring that no vapours, dust or oxygen can be sucked in from the workshop floor.

Plug & Play Design: This cabinet heater can be installed easily by any tradesperson. It simply needs a hole to be created in a wall for exhaust fumes to be flued outside, a hole for the fresh air intake, and then plugged into a standard 230v plug socket.

50L Fuel Tank: Provides plenty of fuel to keep the heater running, can be topped up easily when needed and can be removed for cleaning.

230v Power Supply: Can be plugged easily into any standard 230v pocket socket, for convenience and ease of installation.

Overheat Protection: Shuts the heater down automatically if it starts to overheat, preventing an accident.