Powrmatic CPx30 Upright Oil Fired Cabinet Heater - 230v 30kW

Powrmatic CPx30 Oil Fired Cabinet Heater

30kW cabinet heater ideal for workshops, warehouses & factories

The Powrmatic CPx30 is an efficient ErP compliant 30kW cabinet heater, ideal for keeping a range of industrial buildings warm and comfortable, including workshops, warehouses & factories.

This warm air cabinet heater is an upright unit and it is designed to combine ease of installation with excellent heat output, to match the most stringent applications. It is built to the highest standards, with a tough and durable outer casing and robust inner components.

The Powrmatic CPx30 is designed to be installed in the space with a flue set up to vent exhaust fumes outside through the roof. Clean warm air is distributed out of the unit by an internal fan. The CPx30 comes with two adjustable warm air outlets with louvres, which allow you to direct the warm air where it is required. It is optionally available with a ducted outlet, which can be specified with different external static pressures to give maximum versatility for air handling type installations. Enquire with our sales team for information and pricing on custom ducted outlet options.

This heater comes fitted with the Powrmatic MC200 Optimised Heater Controller. This digital control panel offers password protection to prevent unauthorised tampering, temperature dependent optimised start and stop to improve fuel economy and digital programmable timeclock. It also offers electronic day thermostat with variable hysterisis, night set-back/frost protection thermostat, remote temperature sensing option, fan only switch for ventilation in warmer periods and it is ECA approved.

All heaters in the Powrmatic CPx range are fitted with market-leading Riello high-low control burners as standard. They are also supplied with a 90° flue tee that has a flue gas analysis sample point. The flue should essentially be installed in the vertical plane and the number of bends kept to a minimum. The flue must be adequately supported and terminated with a suitable cowl, with due regard to the point of exit and its proximity to any windows, doors or ventilation intakes.

The Powrmatic CPx30 cabinet heater meets the latest ErP regulations for reduced NOx and increased seasonal efficiency. It is type tested, CE approved and comes with a two year parts and one year labour guarantee, as well as a ten year time related warranty on the heat exchanger assembly. (All guarantees are subject to terms and conditions).

Model: CPx30
Output: 30kW
Input (nett CV) 35sec oil: 32kW
Old Powrmatic Reference: CP100
Thermal Efficiencies (Nett CV): Min 91.5%
NOx Seasonal (Gross): 56 mg/kWh
Seasonal Space Heating Efficiency (% hs,h): 73.6%
Airflow: 0.97 m³/s (3,482 m³/h)
Adjustable Heads: 2
Head Size: 203mm
Air Throw: 15m
Pressure (Standard Fan): 188Pa
Power Supply: 230v / 1ph / 50Hz
Motor Power: 1.1kW
Run: 4.5 amp
Start: 8.1 amp
Connection (Oil): 3/8” BSP/Rc
Consumption Standard Outputs: 3.16 l/h
Overall Dimensions H x W x D (excluding burner): 2024 x 669 x 732 mm
Installation Clearances (Front / Side / Blank Side / Rear): 1000 / 1000 / 150 / 1000 mm
Flue Diameter: 125mm
Combustion Air Spigot Diameter: 150mm
Noise Level: 56 dB(A)
Nett Weight: 168kg
(Noise levels are applicable to standard models and are measured 5m from appliance and in free field conditions.)

Guarantees:
Powrmatic CPx heaters are provided with a comprehensive guarantee covering both the heater and the heat exchanger. For United Kingdom sales the heater has the benefit of a two year parts and one year labour guarantee whilst the heat exchanger assembly has a ten year time related warranty. All guarantees are subject to terms and conditions

30kW Heat Output: Great heat output for a range of industrial spaces including workshops, garages and small warehouses and factories.

3,482 m³/h Airflow: Large airflow allows the Powrmatic CPx30 cabinet heater to heat spaces effectively and efficiently, with a heat throw of 15m and fan pressure of 188Pa.

Red Diesel or Kerosene Fuelled: This oil-fired industrial cabinet heater can be specified to run on either 35sec oil (red diesel) or 28sec oil (kerosene).

2 x Adjustable Air Distribution Heads: This model comes with 2 x adjustable heads with variable louvres, which allow the warm air to be directed where it is required.

Ducted Air Outlet Available: An optional ducting outlet is available, which allows the warm air outlet to be fitted with lengths of ducting. The heater can be specified with different external static pressures to give maximum versatility for air handling type installations.

High Quality Design & Build: Tough outer casing protects internal components and state of the art burners, air movement and control technology ensure reliable and effective performance, maintaining the temperature rises required in cabinet heater installations.

High/Low Burner Technology: Powrmatic uses a market leading Riello Gulliver burner, which reduces NOx, increases seasonal efficiency and reduces running costs.

MC200 Controller: Comes fitted as standard. Features simple touch button controls and offers password protection, thermostat control, digital programmable timelock, fan only switch and more.

ErP Compliant: Complies with the latest standards to ensure efficient and effective running.

125mm Diameter Flue: CPx heaters are supplied with a 90° flue tee that has a flue gas analysis sample point. The heater requires a separate flue system of 125mm diameter. The flue should essentially be installed in the vertical plane and the number of bends kept to a minimum. The flue must be adequately supported and terminated with a suitable cowl, with due regard to the point of exit and it’s proximity to any windows, doors or ventilation intakes.

3/8” BSP/Rc Fuel Connection: Designed to be connected to an external fuel tank.

Comprehensive Guarantees: The cabinet heater has a two year parts and one year labour guarantee, whilst the heat exchanger assembly has a ten year time related warranty.