Ideal Logic Air Flexible Hose 750mm 236910
The Ideal Heating Flexible Hose 750mm is designed to be used in conjunction with Ideal Logic Air monobloc air source heat pumps. It adds an extra 250mm onto the 500mm option and can be installed in hard to reach areas with awkwardly placed pipework.
The 28mm (1") diameter hoses feature thick-walled thermal insulation which limits the heat lost on external pipe runs while dampening the vibrations from the compressor, before they reach the building pipework. The full 28mm (1") bore diameter gives continuous hydraulic flow rates for the heat pump COP (Coefficient of Performance) and avoids any restrictions to flow.
Features and Benefits: Ideal Heating Flexible Hose 750mm
750mm Extension: Extra length to cross larger voids, without forcing bends or pulling the pipework taut.
Preinsulated Barrier: The insulation keeps the temperature of the primary water flow and prevents frost damage, getting rid of the need for secondary insulation sleeves.
Vibration Suppression: Stops the movement of the compressor from working through the copper lines on to internal joists and wall cavities.
High-Flow 28mm Internal Bore: Complies with the volumetric flow requirements of Logic Air heat pumps, putting a stop to error codes and pump head pressure build-up.
Flexible Routing: Allows you to deal with complicated offsets and tight working angles at base pads and around structural obstructions.
Need a shorter length of pipe?
If your installation is direct and closely coupled to a pipe from the base of the heat pump then the Ideal Heating Flexible Hose 500mm may suit you better. This model is effectively the same hose, just smaller, making it ideal for compact installations.
Preventing Sag
The 750mm length gives you plenty of flexibility for installation, but do make sure the hose is supported so it does not sag towards the middle of the run. Make sure all bends are gentle and generous and never bend the hose further than the specified minimum bend radius. Putting a kink in the hose's internal liner will hinder water flow and cause the heat pump's efficiency to suffer.
Buy from National Heater Shops
Shop the complete range of genuine Ideal Heating fittings at National Heater Shops. All orders come with our Price Match Guarantee, fast UK delivery, and technical support from our HVAC team.
