Dania SSH 3.3kW Wall Mounted Electric Fan Heater - 230v 3.3kW

Dania SSH 3.3kW Wall Mounted Electric Fan Heater

Ideal for workshops, garages, warehouses & more

The Dania SSH 3.3kW electric fan heater is a 230v appliance designed for stationary operation. It comes with an adjustable wall mount bracket, which allows you to fix the unit to a wall in your space quickly and easily. The mount allows the heater to be mounted in 3 different positions horizontally and 3 different positions vertically, so the stream of warm air can be directed as required.

The operating mode switch is used to choose between full heating power, half heating power, fan mode, or to turn off the device. These heaters also feature an integrated thermostat and overheat protection.

The Dania SSH 3.3kW heater is manufactured with a corrosion proof housing made from white powder coated steel panels. It offers a robust solution for temperature control in demanding environments.

Dania SH 6kW Wall Mounted Electric Heater
Heating Power (kW): 3 / 6
Power Supply (V): 3 x 400 / 50Hz
Rated Current (A): 9
Airflow (m3/h): 700/900/1300
Fan diameter (mm): 300
Dimensions LxWxH (mm): 460x397x486
Weight (kg): 17.31
IP Rating: IP44
Noise level: 42-58 dB
Inbuilt Thermostat: Yes
Ventilator Mode: Yes

3.3kW Heat Capacity: Great heating power from a compact unit. Ideal for garages, workshops, areas in warehouses, factories & more.

100% Clean Warm Air: Can be used in enclosed and confined spaces. As the heater is powered by electricity, it produces no fumes and does not consume oxygen within the space. Provides a safe alternative to gas and diesel heaters.

IP44 Rated: Protected from solid particles that are over 1mm in size and from low velocity sprays of water from every direction.

Wired Control Panel Included: Can be installed on the wall, allowing you to control the heater whilst it is suspended high on the wall.

Two Heat Levels: Allows the heater to operate at full or half capacity. You can select the ideal heat level required for your space.

Three Fan Speeds: Select the fan speed most suitable for the environment.

Inbuilt Thermostat: Allows a required temperature to be set. The thermostat will switch the heater on and off as required in order to maintain the required temperature.

Ventilation Switch: Allows the fan to be operated without heat for ventilation in warmer months.

Overheat Thermostat: Shuts down the heater if it starts to overheat, to prevent accidents.