Master DHP 55 Industrial Dehumidifier - Dual Voltage 46 Litres

Master DHP 55 Industrial Dehumidifier

Fast-drying dual voltage dehumidifier for a range of applications

The Master DHP 55 Industrial Dehumidifier can extract up to 46 litres of moisture in just 24 hours. Ideal for tackling flooding or water damage thanks to its built-in discharge pump, which is fitted as standard for continuous operation. Plus, there is the option to add a 5-litre water tank if you do not have access to a suitable drain.

The Master DHP 55 dual voltage dehumidifier boasts a corrosive-resistant rotomoulded body, built-in hydrostat, digital humidity sensor, hour counter, digital control panel and automatic shut-off.

An easy drying solution to install, operate and manage in demanding areas of up to 700m³. This heavy duty dehumidifier draws air in using a fan, crosses it over refrigerant-cooled coils and causes the moisture in the air to condense into liquid.

Used following flooding or water damage, this dehumidifier will effectively remove moisture from the air when placed in an affected room. Another great use for a dehumidifier is for drying plaster, allowing you to finish decorating the room even sooner. While a dehumidifier on its own can be very effective, it is worth considering using a heater and or an air mover or carpet dryer at the same time to speed the process.

Voltage: Dual Voltage (110 & 240) 
Max Room Size (Approximate): 700m3 
Capacity (30 Degree C/80% RH): 45.9 Litres Per 24 Hours
Air Displacement (m3/h): 340M3 Per Hour
Operating Range (Temperature): 5 - 35 Degrees C 
Operating Range (Humidity): 20 - 90% 
Power Consumption: 790 Watts 
Tank Capacity: 5 Litres (Optional Extra)
Permanent Drain Facility: Yes (With Pump & Hose)
Built In Condensate Pump: Yes
Pump Lifting Height: 3 Metres 
Pump Discharge Length: Up To 10 Metres
Refrigerant Gas: R290
Continuous Operation: Yes
Built In Hydrostat: Yes
Automatic Shut Off: Yes
Tank Full Indicator: Yes
Controls: Digital
Length: 600mm
Width: 450mm
Height: 880mm
Noise Level: 56 db(A)
IP Rating: TBC
Weight: 47Kg

Extraction Rate of 46 Litres/Day: This professional dehumidifier is an exceptionally easy drying solution to install, operate, and manage in demanding areas of up to 700m³ with a max airflow rate of 400m³/h.

Condensate Pump with Hose Connection: Allows the dehumidifier to run continuously without the need to empty a water tank. Comes with 3m hose.

5L Water Tank (Optional): The Master DHP 55 dehumidifier does not come with a water tank supplied and is available to order as an optional extra.

Built-In Hydrostat: This measures the amount of moisture in the air that is passing through the system.

Automatic Shut Off: A microswitch ensures that the dehumidifier switches off when the water tank reaches its capacity.

Dual Voltage Power Supply: This unit can operate on either 240v (domestic) or 110v (site) power supply.

Quality Components: This dehumidifier has an air filter and a durable rotomoulded outer casing, which is more than capable of dealing with the day-to-day trials of long-term use on site.