Flotide Pool pump 50 mm / 1 1/2" metric/imperial 3,5A 230VAC

Flotide Pool pump 50 mm / 1 1/2" metric/imperial 3,5A 230VAC

The Flotide Pool pump 50 mm / 1 1/2" metric/imperial 3,5A 230VAC cleans the family swimming pool sufficiently and doesn’t cost a fortune to do so. It runs on a 230V power supply while only drawing 3.5 Amps, making it far cheaper to run as it requires so little electricity.

Installation cannot be any easier either. The pool pump includes 50 mm metric and 1.5-inch imperial pipe connections to accommodate a variety of plumbing requirements and limit the number of trips to find the correct size pipes. The unit also features plenty of safety features to protect the internal components as well as the users during installation and use. Fitted with an RCD differential plug that provides extra protection during electrical shortages, and thermal protection to prevent overheating, this unit is set up for success. Finally, it features a water-resistant rating and insulation, which offer further protection to this pump from water damage.

Features & Benefits: Flotide Pool pump 50 mm / 1 1/2" metric/imperial 3,5A 230VAC

• Peace-of-Mind Protection: The built-in RCD plug cuts the power in the event of an electrical short, protecting the essential components without the need for external breakers.

• Corrosion-Resistant Components: Engineered with rugged components for better resistance to harsh pool chemicals and the weather.

• Efficient Yet Strong: The 0.75 HP motor offers powerful circulation for family-sized swimming pools while only drawing 3.5A of power.

• Simplified Installation: Both metric and imperial pipe connections are included to streamline the installation process.

Save On Your Electricity Bill

Pool maintenance needn’t be expensive. The Flotide 3,5A 230VAC pump is equipped with a 0.75 kW motor that pushes 14,4 m³/h of water through filtration, which is more than sufficient for swimming pools on the smaller side. It only pulls 3.5 Amps, which means that you can run your filtration cycle daily without hardly noticing it on your electricity bill. Take your pool maintenance to the next level with this compact yet powerful pool pump.

Non-Negotiable Safety

Electrical equipment always requires an extra layer of safety, both for the components in the equipment and the operator. This unit is pre-fitted with a UK plug with an integrated RCD (Residual Current Device) to immediately cut the power if an electrical shock should occur. This additional protection goes a long way when you’re installing the unit, or it needs to operate in slightly wetter conditions.

Maintenance That Is Easy

The integrated pre-filter basket is covered with a transparent lid that locks in place with an easy-turn ring. The clear cover allows for quick and easy inspection of the basket at a glance. There is no need to even open the unit to check. The pump is even equipped with a draining plug with an O-ring that drains the water out of the pump to prevent frost.

Type: UK plug
Shaft & Material seal: Stainless steel 316
Capacity: 14,4 m³/h
Power: 0.75 kW
Frequency: 50 Hz
IP value: IPX5
Size: 50 mm / 1 1/2"
Voltage: 230VAC
Weight: 9.01 kg
Ampere: 3,5 A
Output Power: 0,75 HP
Dimensions: 340 mm (H) x 552 mm (L) x 211 mm (W)