Flotide Pool pump 50 mm / 1 1/2" metric/imperial 2A 230VAC

Flotide Pool pump 50 mm / 1 1/2" metric/imperial 2A 230VAC

Invest in a pool pump that sufficiently cleans small to medium-sized swimming pools and doesn’t cost a fortune in maintenance and energy use. The Flotide Pool pump 50 mm / 1 1/2" metric/imperial 2A 230VAC offers exactly that and more. This pool pump runs at a meagre 0.33 HP, which makes it a far cheaper option than more powerful pumps that require more energy for the same pool volume.

Installation cannot be any easier either. The pool pump includes 50 mm metric and 1.5-inch imperial pipe connections to accommodate a variety of plumbing requirements and limit the number of trips to find the correct size pipes. The unit also features plenty of safety features to protect the internal components as well as the users during installation and use. Fitted with an RCD differential plug that provides extra protection during electrical shortages, and thermal protection to prevent overheating, this unit is set up for success. Finally, it features a water-resistant rating and insulation, which offer further protection to this pump from water damage.

Features & Benefits: Flotide Pool pump 50 mm / 1 1/2" metric/imperial 2A 230VAC

• Peace-of-Mind Protection: The built-in RCD plug cuts the power in the event of an electrical short, protecting the essential components without the need for external breakers.

• Durable Components: Manufactured with 316 stainless steel, the shaft and seals will resist the pool chemicals it comes into contact with, and corrosion or leaks won’t be an issue.

• Whisper-Quiet Operations: Fitted with quality NSK bearings to reduce the friction noise, this pump operates at a low 55 dB.

• Simplified Installation: Both metric and imperial pipe connections are included to streamline the installation process.

Lower Your Electricity Bill

Pool maintenance needn’t be expensive. The Flotide 2A 230VAC pump is equipped with a 0.25 kW motor that pushes 10.4 m³/h of water through filtration, which is more than sufficient for swimming pools on the smaller side. It only pulls 2 Amps, which means that you can run your filtration cycle daily without hardly noticing it on your electricity bill. Take your pool maintenance to the next level with this compact yet powerful pool pump.

Made For The Water

Not only does this pool pump house high-grade components that withstand rust and degradation, but it features an IP55 protection rating and Class B insulation, meaning that water splashes won’t contribute to causing water damage to the pump. Reap the benefits of this pool pump.

Maintenance That Is Effective and Affordable

The integrated pre-filter basket is covered with a transparent lid that locks in place with an easy-turn ring. The clear cover allows for quick and easy inspection of the basket at a glance. There is no need to even open the unit to check. The pump is even equipped with a draining plug with an O-ring that drains the water out of the pump to prevent frost.

Type: UK plug
Shaft & Material seal: Stainless steel 316
Capacity: 10,4  m³/h
Power: 0.43 kW
Frequency: 50 Hz
IP value: IPX5
Size: 50 mm / 1 1/2"
Voltage: 230VAC
Weight: 6.5 kg
Ampere: 2 A
Output Power: 0,33 HP
Dimensions: 340 mm (H) x 507 mm (L) x 211 mm (W)