Baxi 210L Air Source Heat Pump Cylinder 210 Litres

Baxi 210L Air Source Heat Pump Cylinder

The Baxi 210L Air Source Heat Pump Cylinder is intended to work alongside your heat pump to provide hot water for your home. Designed and manufactured by Baxi and Heatrae Sadia, they can be used with most air source heat pumps, such as the Baxi HP40 range.

Features & Benefits: Baxi 210L Cylinder

• Compatibility: Designed to work with air source heat pumps, including the Baxi HP40 range.

• Fast Reheating: A large 2.0 m² heat exchanger coil (33.2 kW) heats the hot water for your home in under 22 minutes.

• High Yield: The 210 litres tank gives you up to 204 litres of hot water above 40°C.

• ErP Rating:The ErP Class B tank features 60mm of insulation to keep daily heat loss to 1.5 kWh.

• Water Pressure & Flow: Capable of delivering hot water to multiple bathrooms in your home with 1.5 bar and 20 L/min flow rate.

• Hot Water Backup: A 3 kW boost immersion and a smart backup immersion is designed for emergency use.

• Built to Last: The corrosion-resistant stainless steel tank is housed inside a tough outer steel shell.

• Size & Weight: A slim unit measuring 1,516 mm x 579 mm weighing 46 kg when empty.

Complete System Integration

To make the most of the cylinders fast 21.5-minute re-heat time, pair it with a heat pump that matches your heating needs. The Baxi 210L integrates well with the following models:

• For Medium-Sized Homes: Combine this cylinder with the Baxi HP40 7kW Monobloc Air Source Heat Pump for fast hot water in busy homes.

• For Smaller Homes: Pairing with the Baxi HP40 5kW Monobloc Heat Pump will give you a highly stable system that reduces energy waste.

Before buying, we strongly recommend that customers have an MCS-certified fitter check your required heat output by completing a BS EN 12831 room-by-room heat-loss calculation.

Build Quality & Warranty

Designed for everyday use, this cylinder is built with a stainless steel tank and steel outer casing. Baxi offers a 10-year tank warranty and a 2-year parts and labour warranty when serviced annually by a G3-qualified fitter.

Buy the Baxi 210L Online

Available to purchase today from National Heater Shops. We offer a Price Match Promise, rapid UK delivery and technical support from our HVAC team.

• Capacity: 210L
• Actual Volume: 209L
• Hot Water Capacity Above 40°C: 204L
• Cylinder Type: Unvented Air Source Heat Pump Cylinder
• Inner Vessel Material: Stainless Steel
• Coil Surface Area: 2m²
• Coil Volume: 5.2L
• Coil Heat-Up Time @ 15L/min: 21.5 Minutes
• Coil Rating @ 15L/min: 33.2kW
• Immersion Heater Rating: 3kW @ 240V / 2.7kW @ 230V
• Standing Heat Loss: 1.5kWh/24h
• Energy Efficiency Class: B
• Maximum Mains Pressure: 16bar
• Maximum Design Pressure: 6bar
• Operating Pressure: 3.5bar
• Maximum Primary Pressure: 3bar
• Water Connections: 22mm Compression
• Height: 1516mm
• Diameter: 579mm
• Empty Weight: 46kg
• Full Weight: 255kg
• Expansion Vessel: 18L
• Warranty: 2 Years
• Inner Tank Warranty: 10 Years