Olimpia Splendid Unico Air Inverter 20SF Air Conditioner 230v 1.7kW

Olimpia Splendid Unico Air Inverter 20SF Air Conditioner

Powerful & Efficient All-In-One Unit

The Unico Air Inverter 20SF R32 is one of the thinnest and quietest air conditioners in its range thanks to its ingenious design and innovative inverter technology.

Measuring only 16cm in depth, this all-in-one air con system is super compact compared to most other units of the same power that usually require an external condenser. This easy to install, all-in-one air conditioning system can be placed high up or low on a wall inside your home, office, bar or restaurant in just a few minutes. The Unico is supplied with a multi-function remote control with 24hr timer, so you can control the climate from the comfort of your seat.

Developed with ultra-modern inverter technology, the Unico does not require a splitter and only needs two external holes - saving 30% of energy compared to a traditional wall-mounted air conditioner. It works by constantly adjusting the motor speed according to the set temperature - saving time, energy and effort.

Slim & Silent Wall-Mounted Air Conditioner

Planet-Friendly Climate Control System

The unit operates practically silently thanks to sound-absorbing and anti-vibration materials. The Unico boasts one of the lowest noise levels in its range with operation volume dropping as low as 27dB(A). This is as quiet as a whisper, meaning you can install this air conditioner in any bedroom, office or study and retain a peaceful tranquillity.

Achieving an eco-conscious and planet-friendly performance, the Unico uses the R32 refrigerant, which has a reduced greenhouse effect by almost 70% (compared to the previous R410A).

Enjoy energy-efficient air conditioning year-round with the Unico Inverter!

Cooling power (min/max) kW: 1.5/2.1
Heating power (min/max) kW: -
Nominal cooling capacity (1) kW: 1.7
Nominal heating capacity (1) kW: -
Nominal power consumption for cooling (1) kW: 0.7
Nominal absorption for cooling (1) A: 3.1
Nominal power consumption for heating (1) kW: -
Nominal absorption for heating (1) A: -
Nominal energy efficiency index (1): 2.6
Nominal efficiency coefficient (1): -
Energy efficiency class in cooling (1): A
Energy efficiency class in heating (1): -
Energy consumption in “thermostat off” mode W: 24
Energy consumption in “standby” mode (EN 62301) W: 0.5
Energy consumption for double pipe appliances (1) cooling function kWh/h: 0.7
Energy consumption for double pipe appliances (1) heating function kWh/h: -
Supply voltage V-F-Hz: 230-1-50
Supply voltage (min/max) V: 198 / 264
Maximum power consumption in cooling mode kW: 0.5/0.9
Maximum absorption in cooling mode A: 2.4/4.1
Maximum power consumption in heating mode kW: -
Maximum absorption in heating mode A: -
Dehumidification capacity l/h: 0.6
Air flow rate in cooling environment (max/med/min) m³/h: 235/180/150
Air flow rate in heating environment (max/med/min) m³/h: -
External air flow rate in cooling (max/min) m³/h: 380/190
External air flow rate in heating (max/min) m³/h: -
Internal ventilation speed: 3
External ventilation speed: 2
Diameter wall holes** mm: 162
Electric resistance heating: -
Maximun remote control range ( distance / angle ) m / °: 8 / ±80°
Dimensions (WxHxD) (without packaging) mm: 978 x 491 x 164
Dimensions (WxHxD) (with packaging) mm: 1060 x 595 x 250
Weight (without packaging) kg: 37
Weight (with packaging) kg: 41
Internal sound pressure (min/max) (2) dB(A): 27-38
Internal sound power level (EN 12102) LWA dB(A): 53
Degree of protection provided by covers: IP 20
Refrigerant gas* Type: R32
Global warming potential GWP: 675
Refrigerant gas charge kg: 0.28
Maximum operating pressure MPa: 4.28
Power cable (N° pole x section mm²): 3 x 1.5

(1) Test conditions: the data refer to the EN14511 standard - HEATING MODE: Temperature: outdoor environment DB 7°C / WB 6°C; indoor environment DB 20°C / WB 15°C -
COOLING MODE: outdoor ambient temperature DB 35°C / WB 24°C; indoor environment DB 27°C / WB 19°C
(2): Declaration of test data in a semi-anechoic chamber at a distance of 2m, minimum pressure in ventilation only.
* Hermetically sealed equipment containing fluorinated gas with GWP equivalent 675 (R32) and 2088 (R410A).

(1) Test conditions: the data refer to the EN14511 standard - HEATING MODE: Temperature: outdoor environment DB 7°C / WB 6°C; indoor environment DB 20°C / WB 15°C - COOLING MODE: outdoor
ambient temperature DB 35°C / WB 24°C; indoor environment DB 27°C / WB 19°C
(2): Declaration of test data in a semi-anechoic chamber at a distance of 2m, minimum pressure in ventilation only.
* Hermetically sealed equipment containing fluorinated gas with GWP equivalent 675.

Slim Design: Measuring only 16cm in depth, the all-in-one wall-mounted indoor unit is super compact.

Silent System: The Unico Inverter boasts one of the lowest noise levels in its range with operation volume dropping as low as 27 dB(A).

Inverter Technology: Constantly adjusts the motor speed according to the set temperature to optimise energy conservation.

Easy-To-Use Controls: Multi-function remote control with a 24h timer supplied – So you can control the climate from the comfort of your seat.

Eco-Friendly Regenerated Gas: The Unico uses the R32 refrigerant, which has a reduced greenhouse effect by almost 70% (compared to the previous R410A).

No Outdoor Unit Required: The Unico can be quickly and easily installed high up or low on the wall using internal fixing points.