Reznor SCR-ECO Radiant Plaque Heater 7.5kW - 41.8kW

Reznor SCR-ECO Radiant Plaque Heater

Effective infrared heater

Available From 7.5kW, 17.5kW, 27.0kW, 41.8kW

The Reznor SCR-ECO series of radiant plaque heaters are perfect for a wide range of applications. You can use them for safe and efficient heating in large, open spaces, including churches, factories, sports halls, warehouses, and workshops. As they are unflued gas-fired, infrared heaters, they are suitable for high air filtration areas, high ceiling spaces, and spot heating. You can run them on both natural gas and LPG. A replacement jet is required for LPG.

These industrial heaters offer a range of control functions. They have a simple on/off switch, time-switch, and thermostat. You can also control the heaters with the Smartcom single-zone control panel with remote black bulb sensor. Control options allow you to save money and energy consumption, as you can adapt usage to your needs.

The fully automatic burner ignition system is highly efficient. It includes a direct spark ignition, which allows these heaters to warm a space quickly. You need a 240 Volt single phase electrical supply for operation.
Reznor SCR-ECO plaque heaters are available in a range of heat outputs, including 7.5kW, 17.5kW, 27.0kW, and 41.8kW. Each model comes with an adjustable wall bracket, which allows you to choose from four angles. You can position the outlet to throw heat directly to the ground, or at 15°, 30°, or 45°.

Reznor SCR-ECO Radiant Plaque Heater
Gas Type: G20 (natural gas), G31 (propane gas)
Gas Connections: 1/2'' BSP
Burner pressure (mbar): 17.0 (G20)
Natural Gas Maximum inlet pressure (mbar) - Natural Gas: 50.0 (G20)
Burner pressure (mbar): LPG 27.7 (G31)
LPG Maximum inlet pressure (mbar): 50.0 (G31)
Electrical supply: 230V AC ~ 50Hz

Model 7/4

Length (mm) 580
Height (mm) 378
Depth (mm) 265
Weight (Kg) 7.0

Model 18/10

Length (mm) 1130
Height (mm) 378
Depth (mm) 265
Weight (Kg) 11.5

Model 29/16

Length (mm) 1680
Height (mm) 378
Depth (mm) 265
Weight (Kg) 16.0

Model 44/12+12

Length (mm) 1320
Height (mm) 615
Depth (mm) 265
Weight (Kg) 24.0

Ceramic Burner: Maximizes infrared output radiation. Ensuring a heat output capable of warming all areas.

Stainless steel burner box & reflector design: Ensuring heater is well insulated

Direct spark ignition: Maximizing heater start-up efficiency

Simple To Use: With a variety of control functions on offer this heater will be effortless to operate

Low Maintenance: Operates on eithernatural gas or LPG

Available in four sizes: Offering a range of heating outputs from 7.5kW, 17.5kW, 27.0kW, 41.8kW