Powrmatic CXO 200kW Oil-Fired Warm Air Cabinet Heater 200kW

200kW Heat Output
Riello Gulliver Oil Burner
MC200 Controller
Freeblowing & Ducted Units
10-Year Heat Exchanger Warranty

NHS Heating CalculatorFigure out how much kW you need to heat your space

10Years Warranty

Call for advice0808 196 9380

Price for: CXO200UD/3

£7,496.28 (ex VAT)£8,995.54 (inc VAT)

Price Match

Powrmatic CXO 200kW Oil-Fired Warm Air Cabinet Heater

The Powrmatic CXO 200kW is an oil-fired cabinet heater that has been built for large industrial sites. With 200kW of nominal heating power, we recommend this cabinet heater for structural heat loss in places such as workshops, warehouses, factories, and agricultural buildings that are operated outside the national gas grid network.

Designed and manufactured in the UK for commercial and industrial use, the CXO 200 uses the sophisticated MC200 controller to pre-heat buildings, ahead of shift and before staff arrive.

Features & Benefits: Powrmatic CXO 200kW

200kW Output: Gives huge heat recovery for large industrial spaces.
Riello Gulliver Burner: The burner boosts fuel economy and allows for easy annual maintenance.
Flexible Fueling: Runs on either Kerosene or Gas Oil for off-grid heating on site.
Dual Configuration (UF & UD): Available as either freeblowing or ducted. Choose UF for ductless heating, or UD for duct networks.
Stainless Steel Heat Exchanger: Its weld-fatigue resistant design comes with a 10 year warranty.
Smart Terminal: Using the heater with the MC200 controller gives you control over scheduling. It is also password protected to prevent tampering.

Standards & Certifications

Low NOx Emissions: Emits 64 mg/kWh of NOx, besting the UK legal limit of 70 mg/kWh.
ErP Lot 21 Tier 2: Meets Ecodesign Directive 2009/125/EC.
UK Building Regulations (Part L): Exceeds Part L criteria.
BS 2869 Standards: Can burn Class C2 Kerosene (28-second oil) or Class D/A2 Gas Oil (35-second oil / Red Diesel).

Tailored Air Distribution

The freeblowing UF model uses louvred air outlets that can be moved in any direction for moving heat towards employees and workspaces, while an airflow rate of 12,600 m³/h stops heat from collecting in high-ceilinged buildings (heat stratification).

The Ducted UD replaces the air outlets with a high-static centrifugal fan. This pushes heated air through ductwork systems to deliver heat through designated grilles.