Ponstar Heavy Duty Automatic Contractors Submersible Pump 290L/Min

Ponstar Heavy Duty Submersible Pump

Compact and Powerful Pumping

These units are capable of producing an impressive 290L/min flow rate whilst remaining extremely lightweight and compact, weighing only 32kg! Whilst designed primarily for clean water operation, they are also capable of processing dirt water infested with a maximum of 3mm solids, making them incredibly versatile.

Extremely Convenient

These pumps come with an automatic float switch for added convenience, these switches allow the motor to be turned on and off according to the water levels the float switch detects. At higher levels, the switch will automatically trigger the motor and will trigger the motor to turn off when the way reduces to an acceptable level. They come in 110v and 2340v variants making them ideal to use at home or on-site! They even come with a carry handle for easy transportation. 

Voltage: 240 Volt or 110 Volt
Suction Type: Submersible
Outlet Diameter: 50mm 2 Inches
Outlet Direction: Top Discharge
Max Flow Rate: 290 Litre Per Minute
Material Intake: Clean & Dirty Water
Motor: 600 Watts
Cut Off Switch: Automatic Float Switch
Plug: 13 Amp or 16 Amp
Max Life Height: 12 Meters
Power Cable Length: 10 Meters
Power Cable Type: H07RNF
Motor Thermal Protection: Included
Lift & Lowering Rope: No
Handle: Included
Max Diameter Solids: 3.0mm
Weight: 32kg

Powerful Pumping: These pumps produce a flow rate of 290 litres per minute. Each has a capacity of 600 Watts or 2047BTU. 240-volt and 110-volt variations of these pumps are each available for purchase on this page.

Compact: These pumps offer lightweight proportions and are only 32kg.

Automatic Float Switch: These pumps come with an automatic float switch that regulates the operation of the pump depending on the rising and falling of water levels.

Dirty & Clean: These pumps have been designed for use in clean water but can process dirty water infested with a maximum of 3mm solids.

Automatic Motor: The automatic motor will turn on and off according to water levels. If the water level is high the float switch will activate the motor. Once the switch lowers the motor will shut off.