Ponstar Heavy Duty Manual Contractors Submersible Pump 290L/Min-300L/Min

Ponstar Heavy Duty Submersible Pump

Manual Water Recirculation System

These Ponstar pumps come in voltages of either 110-volt or 240-volt. Each of these pumps produces a maximum flow rate of either 290 or 300 litres of water recirculation per minute. Both units come with a 600-watt capacity motor that can be shut on or off manually. The pumps come with a manual on/off switch to regulate the unit’s function. These pumps must be manually adjusted according to water levels. These pumps have been crafted to pump clean water but can also process dirty water filled with refuse of up to 3mm in diameter. These lightweight devices also come with a carry handle for ease of movement between working areas.

Voltage: 240 Volt or 110 Volt
Suction Type: Submersible
Outlet Diameter: 50mm 2 Inches
Outlet Direction: Top Discharge
Max Flow Rate: 290 or 300 Litre Per Minute
Material Intake: Clean & Dirty Water
Motor: 600 Watts
Cut Off Switch: Manual
Plug: 13 Amp or 16 Amp
Max Life Height: 12 Meters
Power Cable Length: 10 Meters
Power Cable Type: H07RNF
Motor Thermal Protection: Included
Lift & Lowering Rope: No
Handle: Included
Max Diameter Solids: 3.0mm
Weight: 32kg

Powerful Pumping: These pumps produce a flow rate of either 290 or 300 litres per minute. Each has a capacity of 600 Watts or 2047BTU. 240-volt and 110-volt options are each available on this page.

Compact: These units offer sleek dimensions and weigh only 32kg.

Manual Cut-Off Switch: These pumps come with a manual cut-off switch that regulates the operation of the pump depending on the rising and falling of water levels. These pumps must be manually adjusted according to these levels.

Dirty & Clean: These pumps have been made for use in clean water but can pump dirty water infested with a maximum of 3mm solids.