JS Pump RSD400 Residue Pump 180L/Min

JS Pump RSD400 Residue Pump

A Quality Recirculation Unit

This RSD400 JS Pump is a lightweight yet powerful water recirculation system. With powerful pumping power, these units produce a flow rate of 180 litres per minute of processed water. These devices require a 110-volt power supply and a 400-volt capacity. These pumps come with a manual shut off switch used to start or end the operation of the unit dependent upon desired water levels. These pumps are well suited for use in clean or dirty water and can process water filled with refuse of up to 2mm in diameter. These 15kg pumps also come fitted with a carry handle for easy transportation.

Voltage: 110 Volt
Suction Type: Residue (Down to 1mm) Submersible
Outlet Diameter: Stepped 30mm. 25mm, 18mm & 15mm
Outlet Direction: Top Discharge
Max Flow Rate: 180 Litre Per Minute
Material Intake: Clean & Dirty Water
Motor: 400 Watts
Cut Off Switch: Manual
Plug: 13 Amp or 16 Amp
Max Life Height: 10 Meters
Power Cable Length: 10 Meters
Power Cable Type: H07RNF
Motor Thermal Protection: Yes
Lift & Lowering Rope: No
Handle: Included
Max Diameter Solids: 2.0mm
Weight: 15kg

Powerful Pumping: These pumps provide a flow rate of 180 litres per minute. Each is a 400 Watts or 1364BTU device. These pumps are available requiring 110 volts of power.

Compact: These water recirculatory units offer slimline proportions and weigh only 15kg. Each is also fitted with a handle to make carrying easier.

Manual Float Switch: These Residue Pumps come fitted with a manual cut-off switch. When water levels fall or rise between the minimum and maximum acceptable levels these units can be dis or re-engaged according to your needs

Dirty & Clean: These pumps can pump clean water easily but are also able to process dirty water that contains contaminants of up to 2mm.