Elite SPK450 Manual Surface Residue Pump 85L/Min

Elite SPK450 1" Submersible Residue Pump

Removes water down to 2mm surface residue

The Elite SPK450 is a robust submersible pump, designed for removing water from basements, homes, trenches and other domestic, commercial and industrial spaces. These water pumps feature a 1" diameter outlet and they are designed to be fully submersed in the water, to a depth of up to 5m, in order to pump the water out and away from the area.

These high quality water pumps are capable of removing water down to 2mm surface residue. They have a flow rate of 85 litres per minute, can handle solids up to 2mm in diameter, and they have a head height of 11m - meaning that the pump can move water vertically up to a maximum height of 10m.

The Elite SPK450 water pump has an adjustable outlet that can be set to pump water out from the top or the side of the pump. The pump comes with a 10m power cord and lifting rope included.

A 10m length of 1" diameter layflat hose is available as an optional accessory, in order to pump the water out of the space and away from the area. You can add the 10m layflat hose to your order using the tick box above.

Voltage: 110v
Suction Type: Submersible
Outlet Diameter: 25mm (1 Inch)
Outlet Direction: Top or Side
Max Flow Rate: 85L per min
Material Intake: Clean & Dirty Water
Motor: 450W
Cut Off Switch: Manual
Plug: 16 Amp
Max Lifting Height: 10m
Power Cable Length: 10m
Motor Thermal Protection: Included
Lift & Lowering Rope: Included
Handle: Included
Weight: 11kg

Pump Housing: AlSi12
Pump Shaft: Stainless iron
Mechanical Seal: Alumina/Graphite (Dual Seal)
Pump Base: NBR with stainless inserted
Impeller: NBR with stainless inserted
Type of liquid: Water with no suspended abrasive material, PH value:6.5-8.5
Max liquid temperature: 40℃
Max Submersion Depth: 5m
Max. Diameter of solids: 2.0mm
Protection Class: IP68
Insulation Class: B