Dri-Eaz Velo Pro Low Profile Airmover 230v 1,190 m³/hr

Dri-Eaz Velo Pro Low Profile Airmover

High performance in a compact, portable design

The Dri-Eaz Velo Low Profile Airmover has been engineered to apply concentrated, broad-path airflow to floors, walls and even ceilings to dry out water-saturated areas. This airmover has five operating positions and an airflow of 1190 M³/Hour. The Velo Pro uses 85 per cent less power consumption than other models. It can be used in conjunction with dehumidifiers to speed up drying times in large rooms and spaces. The Dri-Eaz Velo is perfect for drying out spaces following cleaning, floods and leaks. It can be used for drying carpets, floors, walls, circulating air in garages or shops and more. It has been designed with a rugged rotomolded housing, new easy-to-carry handle, kick stand to angle the unit upwards for stairs and wall drying, and a hospital-grade 4.6m power cord. This unit comes with a two year limited warranty.

Supply voltage: 230 V
Speeds: Single
Operating positions: 5
Max actual airflow: 1190 M³ / Hour
Static pressure (H²O): 28 mm
Motor rating: 0.124 KW
Amp draw: 0.53 A
Power consumption: 0.12 KW / Hour
Weekly running £'S: £3.11
Weekly CO²E: 10.65 KG's CO²e
Sound level: 65 db
Dimensions h × w × d : 58.4 × 45.7 × 22.9 cm
Use weight: 9.52 KG
Controls: On/off
Construction: Rotomoulded polyethylene and injection moulded ABS housing components; steel wire inlet and outlet grills
Stackable: Yes
Cable wrap/storage: Yes
Kickstand: Yes
Power cord length: 4.6 M
Plug type: 3 Pin BS1363
Safety cutout: Dual Thermal
Safety mark: CE
Product warranty: 2 Years – Limited

1190 m³/h Max Airflow: Great airflow rate to promote evaporation and speed up drying times.

Energy Efficient: Up to 85% lower energy consumption than snail blowers. Kwhr counter included, so you can keep on top of running costs.

Flat Diffuser: Focuses the airflow, to send the air where it is most needed.

5 Operating Positions: Versatile unit that can be positioned in a number of different ways in order to dry most effectively in different scenarios.

Kickstand: Installed underneath the unit, this kickstand can be folded out in order to angle the air mover upwards, in order to dry stairs and walls.

Tough Rotomoulded Polyethylene Casing: Protects inner parts and provides protection from the bumps and knocks experienced on site and during transport.

Portable Design: Convenient carry handle for easy transport and mobility around a site.

Stackable: The flat and compact design of these floor fans allows them to be stacked for simple storage and transportation.