Olimpia Splendid Unico Inverter 25 HP Air Conditioner with Heat Pump 230v 2.2kW

Olimpia Splendid Unico Inverter 25 HP Air Conditioner with Heat Pump

Slim & Quiet Wall Mounted Air Conditioner

The Unico Inverter 25HP R32 Wall Mounted Air Conditioner is one of the thinnest and quietest air conditioners in its range thanks to Inverter Technology.

Measuring only 16cm in depth, the Unico Inverter 25HP R32 is super compact compared to most other units of the same power that usually require an external condenser.

Thanks to Inverter Technology, the Unico does not require a splitter and only needs two external holes - saving 30 per cent of energy compared with a traditional wall-mounted air conditioner. It works by constantly adjusting the motor speed according to the set temperature, which helps optimise energy consumption.

The Unico Inverter is ultra-silent thanks to sound-absorbing and anti-vibration materials. Unico Air boasts one of the lowest noise levels in its range with operation volume dropping as low as 27 dB(A).

For the environmentally conscience, the Unico uses R32 refrigerant, which has a greenhouse effect reduced by almost 70 per cent compared to R410A.

The Inverter 25HP R32 boasts a heat pump, which means that you can replace or support traditional heating in intermediate seasons.

Cooling power (min/max) kW: 1.9/2.4
Heating power (min/max) kW: 1.8/2.3
Nominal cooling capacity (1) kW: 2.2
Nominal heating capacity (1) kW: 2.1
Nominal power consumption for cooling (1) kW: 0.8
Nominal absorption for cooling (1) A: 4.7
Nominal power consumption for heating (1) kW: 0.7
Nominal absorption for heating (1) A: 3.4
Nominal energy efficiency index (1): 2.6
Nominal efficiency coefficient (1): 3.1
Energy efficiency class in cooling (1): A
Energy efficiency class in heating (1): A
Energy consumption in “thermostat off” mode W: 33
Energy consumption in “standby” mode (EN 62301) W: 0.5
Energy consumption for double pipe appliances (1) cooling function kWh/h: 0.8
Energy consumption for double pipe appliances (1) heating function kWh/h: 0.7
Supply voltage V-F-Hz: 230-1-50
Supply voltage (min/max) V: 198 / 264
Maximum power consumption in cooling mode kW: 3.7/5.3
Maximum absorption in cooling mode A: 2.5/4.6
Maximum power consumption in heating mode kW: 0.5/0.8
Maximum absorption in heating mode A: -
Dehumidification capacity l/h: 0.8
Air flow rate in cooling environment (max/med/min) m³/h: 235/180/150
Air flow rate in heating environment (max/med/min) m³/h: -
External air flow rate in cooling (max/min) m³/h: 380/190
External air flow rate in heating (max/min) m³/h: 2.5/4.6
Internal ventilation speed: 3
External ventilation speed: 2
Diameter wall holes** mm: 162
Electric resistance heating: -
Maximun remote control range ( distance / angle ) m / °: 8 / ±80°
Dimensions (WxHxD) (without packaging) mm: 978 x 491 x 164
Dimensions (WxHxD) (with packaging) mm: 1060 x 604 x 250
Weight (without packaging) kg: 39
Weight (with packaging) kg: 43
Internal sound pressure (min/max) (2) dB(A): 27-38
Internal sound power level (EN 12102) LWA dB(A): 54
Degree of protection provided by covers: IP 20
Refrigerant gas* Type: R32
Global warming potential GWP: 675
Refrigerant gas charge kg: 0.36
Maximum operating pressure MPa: 4.28
Power cable (N° pole x section mm²): 3 x 1.5

Slim Design: Measuring only 16cm in depth, the Unico Inverter is super compact.

Silent System: The Unico Inverter boasts one of the lowest noise levels in its range with operation volume dropping as low as 27 dB(A).

Regenerated Gas: The Unico uses R32 refrigerant, which has a greenhouse effect reduced by almost 70 per cent compared to R410A.

Inverter System: Constantly adjusts the motor speed according to the set temperature and helps optimise energy consumption.

Wall-mountable: The Unico can be installed on the wall using internal fixing points.

Easy-To-Use Controls: Multi-function remote control with a 24h timer.