Call FREE for expert advice
0808 196 9380
100% Clean Warm Air: Circulates only clean, fume-free warm air, as the fumes produced during combustion are held within the heat exchanger and exhausted outside.
Exhaust Gas Flue: 150mm diameter flue exhaust can be connected up to lengths of flue pipe in order to vent fumes outside.
Plug & Play: Can be installed easily by any tradesperson. It simply needs a hole to be created in a wall for exhaust fumes to be flued outside, and then plugged into a standard 230v plug socket.
High Quality Design: Integrated burner with electronic flame control and photocell cut-off, internal 90 litre fuel tank with filter, fan limit thermostat with automatic reset, high quality centrifugal fan, tough stainless steel combustion chamber, and excellent heat insulation with detachable panels provide reliable, effective and safe performance.
Integrated Thermostat: Allows you to set a required temperature within the space. The heater will automatically switch itself on and off as required in order to maintain the required temperature, saving fuel, energy and money.
230v Power Supply: Can be plugged easily into any standard 230v pocket socket, for convenience and ease of installation.
Summer / Winter Switch: Allows the fan to be used alone without heat, in orde to provide ventilation during summer months.
The Master BF 75 cabinet heater is a 60kW industrial space heater, designed for heating a range of spaces effectively and safely. These Master cabinet heaters are powered by a 230v mains supply and they can be fuelled with a range of different fuels, including diesel, kerosene, paraffin or heating oil. These cabinet heaters are designed to be installed up against a wall, with a flue installed in order to exhaust the fumes produced during combustion outside and away from the space. The heater draws cool air in from the space via an air inlet and burns the fuel in its combustion chamber to heat the cool air. Due to the flue system, only clean, fume-free warm air is circulated into the space via the vents at the top of the heater.
The Master BF 75 cabinet heater is designed and built to be an effective industrial space heater. It features a robust steel outer casing, an internal 90 litre fuel tank with an oil filter, a tough stainless steel combustion chamber, an integrated burner with electronic flame control and photocell cut off, a built in thermostat and an efficient centrifugal fan for effective warm air circulation in order to heat the space properly. This unit also has a fan limit thermostat with automatic reset, excellent heat insulation with detachable panels, and wide inspection doors for easy cleaning and maintenance. The Master BF 75 cabinet heater also features a summer-winter switch which allows you to operate the fan without heating the air, for ventilation during warmer months.
The tough outer casing, high quality components and efficient heating performance of the Master BF 75 cabinet heater ensure that they are able to withstand the demands of industrial use to heat industrial spaces such as workshops, warehouses and factories effectively. As these cabinet heaters are Master space heaters, they come with the protection of the full manufacturer’s warranty, as well as the availability of a range of spare parts, accessories and service kits. This means that you can buy with security, knowing that the Master BF 75 cabinet heater will be able to perform reliably, effectively and safely for years to come.
You will need a flue system in order to install the Master BF 75 cabinet heater in a space. The flue can be set up through a wall or ceiling in order to exhaust the fumes produced during combustion. We can supply flues in a range of different ways to best suit your needs. You can either set the flue up to go straight out of the back of the heater and out through the wall, or up out of the back of the heater and through the ceiling. We can supply flue kits as an accessory. We have 150mm diameter flue sections available in 1m lengths for the Master BF 75 cabinet heater, as well as 90 degree flue elbows and rain cowls. Simply contact our sales team via telephone or online live chat and we can put together a flue kit to suit your needs.
See More Like This: Cabinet Heaters & Garage & Workshop Heaters
Master BF 75 Specifications
Heating Power: 60.1 kW / 205,070 Btu h
Air Displacement: 5300 m3/h
Fuel: Oil
Fuel Tank Capacity: 90 Litres
Fuel Consumption: 5.9 L/H
Electric Power: 0.56 kW
Voltage: 230v
Dimensions (L x W x H): 1220 x 540 x 1700 mm
Weight: 173 kg
Flue Diameter: 150 mm
Ths heater is brilliant - best piece of kit I've bought in years - warehouse is warm even when we're loading - quiet too
just what I've been lookin g for, fast responses on questions and quick delivery, thanjks
Does exactly what it says on the tin, made to last and shipped out fast, thanks
What a brilliant product, high value for its cost, and arrivd quickly
does a great job, works exactly as described - a reliable piece of kit
Whether you need a long-term, short-term, or temporary climate solution, sometimes it can help if you can break the costs down, especially if the situation is unexpected or an emergency.
To help our customers and make climate control and air quality equipment more accessible, we've worked with PayPal to provide a way to spread the cost with PayPal Pay in 3. You can use Pay in 3 for eligible shopping cart amounts between £30.00 to £2,000.00. Terms apply.