Sales & Hire Team
  0800 808 9126

Call FREE: Mobiles & Landlines

  Call Back      LiveChat

Dantherm CDT 30 Mobile Dehumidifier 30 Litres

Call for Price

  Sales Team: 0800 808 9126

Call FREE: Mobiles & Landlines

Product Description

Professional Refrigerant Dehumidifiers

Tough. Cost Effective. Energy Efficient.

The Dantherm CDT 30 is a high quality refrigerant dehumidifier designed for drying out rooms following a flood, burst pipes, renovation or decorating work. These dehumidifiers run quietly, they have an operating range of 3°C - 32°C and an airflow rate of 250m³/h. They are known and trusted throughout the industry for being very well made robust units that offer effective drying along with cost-effective, energy-efficient operation and excellent ease of use.

Harness The Natural Process Of Condensation

Remove up to 30 litres of water per day!

These refrigerant dehumidifiers harness the natural process of condensation to remove moisture from the air, walls and floors within a room. The internal fan draws humid air into the dehumidifier and puts it through an evaporator coil. As the air passes through the evaporator it is cooled down to below its dew point temperature. This causes the water vapour in the air to condense into liquid which is then collected in the internal water container. The dry air is blown back into the room out of the back of the dehumidifier. Using this process, Dantherm CDT 30 dehumidifiers are capable of removing up to 30 litres of water in a 24 hour period.

Robust Dehumidifier Design

Designed to perform in challenging conditions

The Dantherm CDT dehumidifier range has been developed as a professional solution to drying out rooms following floods, leaks, burst pipes and restoration work. These refrigerant dehumidifiers are built to withstand tough site conditions and offer long-lasting reliable performance. The outer casing is manufactured from powder coated hot galvanized steel and the evaporator and condenser are epoxy coated for protection. They also feature large bumpers for protection from knocks and bumps on site. An automatic defrosting function is also built in within the system. If the evaporator reaches 5℃, ice will begin to form on the surface. To prevent an impact on the performance of the dehumidifier, the solenoid valve flushes the evaporator with hot gas. Once a preset temperature is reached, the dehumidifier resumes regular operation.

Easy Electronic Controls

Set up the dehumidifier exactly to your requirements

Dantherm CDT 30 dehumidifiers feature an easy to use digital control panel which allows you to control all of the settings very simply. The digital display offers exact specification of usage hours and energy consumption as well as readings of temperature and relative humidity. It also displays service information, easy fault-finding, and it notifies the operator when the water collection tank is full. This ease of use makes these dehumidifiers very easy to set up, monitor and control on site. Ease of use is further enhanced by the large rubber wheels and an adjustable handle, which make these dehumidifiers very mobile. They can be wheeled around a site, even up stairs, without issues. So you can use the unit exactly where it is required. These dehumidifiers are also stackable for simple storage when not in use.

Condensate Pump Available

No need to manually empty the water tank!

These dehumidifiers come with a 7 litre water collection tank as standard. Once the tank becomes full, the dehumidifier will stop operating until the water tank has been emptied. As an upgrade, we have condensate pump cassettes available for these dehumidifiers which can be fitted instead of the water tank. This allows the CDT 30 dehumidifier to pump the condensate water away to a drain up to 10m from the unit. The pump even has a vertical lift capability of 3 metres. Using the condensate pump cassette allows you to run the dehumidifier continuously, improves productivity and speeds up drying times. It also means you don’t have to keep going back to the dehumidifier to empty the tank. Give our sales team a call to enquire about adding a condensate pump to your order!

Specifications
Operating range – humidity: 40-100% RH
Operating range – temperature: 3-32°C
Dehumidification capacity at 30°C/80% RH: 30l/24h
Air volume: 250 m³/h
Power supply: 230 V/50 Hz
Max. ampere consumption: 2.7 A
Max. power consumption: 0.590 kW
Refrigerant: R 134a
Compressor type: Rotary
Sound level (at 1 metre): 56 dB(A)
Water container capacity: 7 litres
Protection class: IP X4
Filter: PPI 15/G1
Height (Handle down / handle up): 736mm / 1016mm
Width: 426mm
Depth: 506mm
Weight: 32kg

Latest Reviews
There are currently no reviews for this item, why not be the first? ×

Write a review for "Dantherm CDT 30 Mobile Dehumidifier"

×
Your product has been added to the cart
Dantherm CDT 30 Mobile Dehumidifier

Specifications
Operating range – humidity: 40-100% RH
Operating range – temperature: 3-32°C
Dehumidification capacity at 30°C/80% RH: 30l/24h
Air volume: 250 m³/h
Power supply: 230 V/50 Hz
Max. ampere consumption: 2.7 A
Max. power consumption: 0.590 kW
Refrigerant: R 134a
Compressor type: Rotary
Sound level (at 1 metre): 56 dB(A)
Water container capacity: 7 litres
Protection class: IP X4
Filter: PPI 15/G1
Height (Handle down / handle up): 736mm / 1016mm
Width: 426mm
Depth: 506mm
Weight: 32kg

×

Heating Calculator

Not sure how many Kw you need to heat your space? We can help!




×