34L Per Day Capacity: Excellent moisture extraction rate to dry spaces out following leaks & floods, dry rooms following construction work, dry materials and ingredients, and prevent moisture damage & corrosion.
Tough Stainless Steel Casing: Resistant to corrosion, suitable for a range challenging environments.
Silica Rotor: Efficiently absorbs moisture from the air, even in extremely low temperatures.
PTC Heater: Dries the rotor to expel moisture out of the unit as vapour.
Electronic Humidistat: Allows you to control the relative humidity in the space accurately and provides automatic operation, as the dehumidifier will switch on and off automatically as required.
Hour Meter: Allows you to monitor time on the job.
3 Hole Design: Air in, dry air out & wet air exhaust. Moisture is removed by the absorbent and it is purged from the system as water vapour. This means there is no internal water tank to empty and the dehumidifier can be left to run 24/7.
Duct Air In & Out: The Ebac DD400-P dehumidifier has vents fitted with flanges. Air can be vented in and out using simple ducting.
Portable Design: Large EVA tyres and a handle allow the dehumidifier to be moved around easily and used wherever required.
The Ebac DD400-P is a portable desiccant dehumidifier, ideal for use in a wide range of industry sectors. It can be used for drying out spaces following leaks and floods, for process drying during manufacturing & industrial processes, for storage drying to protect from corrosion and moisture damage, and much more.
It can be used in workshops, warehouses, manufacturing facilities, cold stores, laboratories, construction sites, renovations and much more.
The Ebac DD400-P desiccant dehumidifier has the capacity to extract up to 34 litres per day. It is capable of operating at extremely low temperatures, where a compressor dehumidifier would fail to perform.
As it is a desiccant model, the Ebac DD400 extracts moisture from the air using a moisture absorbent silica gel on a rotor. As air passes through the rotor, the humidity of the air is reduced, whilst the moisture content of the rotor is increased.
A smaller volume of air, the reactivation air, is heated by an internal PTC heater and passes through a portion of the rotor in the opposite direction. As this heated air passes through the rotor it will “reactivate” it by removing the moisture content from the silica gel material.
The reactivation air will leave the humidifier as warm, moist air and must be vented to outside of the building.
Continuous circulation of the room air through the dehumidifier unit gradually reduces the relative humidity in the room.
The dual air inlet feature of the DD400-P is ideal for installations where the regeneration supply air, needs to be kept separate from the process supply air. Lengths of ducting can be fixed on to the process air duct and regen air duct on this dehumidifier, so air can be ducted in and out from separate spaces.
The integrated electronic humidistat allows automatic control, as the dehumidifier will switch on and off automatically as required. The hour meter monitors time on the job.
The casing on this machine is fabricated from stainless steel and has been designed for the exacting conditions which can prevail in challenging spaces. The portable design, with large EVA tyres and a handle, mean that it can be transported easily and used wherever it is needed.
Dimensions (H x W x D): 787 x 552 x 487 mm
Frequency (Hz): 50
Power (kW): 2.2
Current (A): 8
Process Airflow - Dry Air (m3/hr): 370
Regen Airflow - Wet Air (m3/hr): 150
Process Air Duct Size (mm): 130
Regen Air Duct Size - Wet Air (mm): 100
Rotor Wheel Speed (rph): 20
Typical Extraction(l/d): 34
Min Operating Temp (°C): -20
Max OperatingTemp (°C): 40
On/Off Control: Yes
Integral Electronic Humidistat: Yes
Manual / Automatic Mode Selection: Yes
Hours Run Meter: Yes
Fitted Main Plug: Yes
Fan Speeds: 1
High Capacity PTC Heater: Yes
Process / Regen Air Filter: Yes
Rubber Anti-Vibration Wheels: Yes
Dual Inlet Design: Yes
Free Standing: Yes
Epoxy Powder Coated Chassis: Yes
Inlet Duct Attachments: No
High Temperature Safety Cut-outs: Yes
There are currently no reviews for this item, why not be the first?
Your product has been added to the cart
EBAC DD400-P Mobile Industrial Desiccant Dehumidifier 230v